The MRC on a metro Ethernet quote is the least important number on the page.
Price in 2026 comes down to one question the carrier already knows and you don't. Is the fiber already lit in both buildings? That answer moves the price by 2 to 3 times. It also decides whether the "fees" section even applies to you. So find it out before you ask for a quote.
What you're actually buying: E-Line, EPL, EVPL
Metro Ethernet links two or more of your sites across town. The MEF terms sound like jargon, but you need them to read a quote.
E-Line is a point to point link between two sites. EPL is a dedicated port. One circuit, one port, no VLAN tagging. When a third carrier handles one end, it shows up as "Access EPL." EVPL is different. It lets several circuits share one hub port, split by VLAN.
Here is the point. If you have three or more branches, an EVPL hub with one 10G port beats three EPLs with three 1G ports. The quote will not volunteer that. You have to ask.
The 2026 price bands and the one variable that sets them
These ranges assume both ends are on-net, a 36 month term, in a major metro.
- 100M: $350 to $800 a month
- 1G: $550 to $1,400 a month
- 10G: $1,200 to $3,500 a month
One end off-net means the carrier rides a third party's fiber for the last mile. Add $300 to $1,200 a month for that loop. It often shows as a separate line called "off-net access" or a "type II" loop. Both ends off-net? Expect a high quote or a flat no.
Watch the 100M and 1G gap. The port is the same between them. The carrier's cost barely moves. So 100M often prices at 70 to 85 percent of 1G. If 100M is quoted within $150 of 1G, take the 1G.
How to find out if you're on-net before you ask
You can check this yourself. Ask the building manager which carriers have fiber in the demarc room (the MPOE or riser).
Then ask each carrier's rep flat out: "Is this address on-net, near-net, or off-net?" They have a lit building list. They will answer. Near-net means fiber in the street but not the building, so a construction charge is coming. Get at least three answers before any quote.
The fees that live outside the MRC
Now walk the quote line by line.
- Install (NRC): $0 to $2,500. Usually waived at 36 months on-net. Rarely waived off-net.
- Special construction: $5,000 to $60,000 or more for near-net. Can be folded into the MRC, which is how a $700 circuit becomes $1,900.
- Cross connect at a colo end: $150 to $400 a month. The data center bills this, not the carrier. It never shows in the carrier quote.
- CPE or NID rental: $25 to $75 a month for a box that costs $400.
- Expedite fee: $500 to $1,500.
- Cancel after you accept: usually the full NRC plus one month of MRC.
- Annual escalator: 3 to 5 percent, written into the MSA, compounding over 36 months.
The three clauses that cost more than the circuit
Find these in the contract before you sign.
Early termination liability. Standard language is 100 percent of the remaining MRC for the term. Sometimes it drops to 50 percent after month 12. Negotiate it to 50 percent from day one, or ask for a technology substitution out.
Auto-renewal. A 12 month rollover with 30 to 90 days written notice. Set a calendar alert at day 120 before the term ends.
Credits for missed uptime. The sheet says 99.99 percent. But the clause makes you request the credit within 30 days of the outage and caps it at one month of MRC. Also hunt for the "price adjustment" clause tied to CPI or carrier discretion. Strike it or cap it.
What a fair 2026 quote looks like
Get written on-net confirmation first. Then get two competing on-net quotes for the same two sites at 1G on a 36 month term. Ask for the NRC waived, the ETF at 50 percent, the escalator removed, and auto-renewal gone.
Here is the benchmark. A 1G on-net E-Line between two sites in a top 30 metro at $900 a month, $0 NRC, no escalator. That is a good deal. The same circuit at $1,400 with a $1,500 NRC and a 4 percent escalator is just the first offer. A broker or a second carrier's near-net build helps when your only option is off-net.
Where metro Ethernet is the wrong answer
If you just need internet access, not traffic between sites, DIA at 1G is cheaper and more useful. If your second site sits in another carrier's colo, an exchange cross connect may replace the circuit. And if latency and privacy don't matter, two DIA links with IPsec cost less than one EPL.
Stop requesting quotes by bandwidth. Establish who is on-net at both addresses, in writing, first. Then ask for 1G, not 100M. Read the four clauses before the MRC. And put the renewal deadline on your calendar the day you sign.